Joe

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • Joe
    Participant

    Adam, with the Canon’s EOS Utility software the camera’s MAC address is not listed. Further, since the camera does not have a laptop or PC to transfer files too, I believe, the Canon has disabled this in EOS Utility atleast for the 1300D model. This was the primary reason why I turned to airnef.

    Thanks
    Joe

    Joe
    Participant

    Luigy, so looks like apparently all the EOS 1300D cameras have this issue. Seems cannon had product differentiation in mind when they decided to disable connectivity to PC when the cam had a built in wifi. But what I don’t understand is, if the camera is able to transfer photos to a smart phone, why could it not transfer to airnef which just simulates a smart phone. Its a shame, a camera having wifi not able to share photos with a PC. 1300D is a cheap entry level DSLR, but does that offer an excuse for canon to disable a wifi connectivity to PC. wifi compatibility was one among the compelling reason why I bought this camera. Who would ever think canon would intentionally cripple this camera. I would be delighted to see any work around (I’m sure there should be one).

    Regards
    Joe

    Joe
    Participant

    Hi Adam,
    Thanks for the suggestion. The SD card I was using was a camera formatted one. It only had 7 images which I clicked just before trying to initiate the transfer using airnef. Thanks.

    Regards
    Joe

    Joe
    Participant

    Hi Adam, xaphod,

    Tried using “–mtpobjcache=disabled” as Adam suggested. Still no joy. Getting the following error

    Regards
    Joe

    execMtpOp: MTP_OP_OpenSession – CmdReq payload:
    0000: 06 00 00 00 01 00 00 00 – 02 10 09 00 00 00 01 00 …….. – ……..
    0010: 00 00 ..
    execMtpOp: MTP_OP_OpenSession – CmdResponse payload (resp=”MTP_RESP_Ok”):
    0000: 07 00 00 00 01 20 09 00 – 00 00 ….. .. – ..
    execMtpOp: MTP_OP_Canon_SetDevicePropValue – CmdReq payload:
    0000: 06 00 00 00 02 00 00 00 – 10 91 0a 00 00 00 …….. – ……
    execMtpOp: Sending MTP_TCPIP_PAYLOAD_ID_DataStart
    0000: 09 00 00 00 0a 00 00 00 – 0c 00 00 00 00 00 00 00 …….. – ……..
    execMtpOp: Sending MTP_TCPIP_PAYLOAD_ID_DataPayloadLast:
    0000: 0c 00 00 00 0a 00 00 00 – 0c 00 00 00 7c d1 00 00 …….. – ….|…
    0010: c0 30 3d 58 .0=X
    execMtpOp: MTP_OP_Canon_SetDevicePropValue – CmdResponse payload (resp=”MTP_RESP_DeviceBusy”):
    0000: 07 00 00 00 19 20 0a 00 – 00 00 ….. .. – ..
    Failed setting camera’s date/time to 11/29/16 01:09:44 PM
    execMtpOp: MTP_OP_GetStorageIDs – CmdReq payload:
    0000: 06 00 00 00 01 00 00 00 – 04 10 0b 00 00 00 …….. – ……
    execMtpOp: MTP_OP_GetStorageIDs – DataStart payload [expected data bytes is 0x8]
    0000: 09 00 00 00 0b 00 00 00 – 08 00 00 00 00 00 00 00 …….. – ……..
    execMtpOp: MTP_OP_GetStorageIDs – Data payload [ID c] (0x00000010 bytes):
    0000: 0c 00 00 00 0b 00 00 00 – 01 00 00 00 01 00 02 00 …….. – ……..
    execMtpOp: MTP_OP_GetStorageIDs – CmdResponse payload (resp=”MTP_RESP_Ok”):
    0000: 07 00 00 00 01 20 0b 00 – 00 00 ….. .. – ..
    All Storage IDs:
    storageId[0] = 0x00020001
    storageId to be used for this invocation: 00020001 [cardsPresentBitmap=0x0001]
    execMtpOp: MTP_OP_GetStorageInfo – CmdReq payload:
    0000: 06 00 00 00 01 00 00 00 – 05 10 0c 00 00 00 01 00 …….. – ……..
    0010: 02 00 ..
    execMtpOp: MTP_OP_GetStorageInfo – DataStart payload [expected data bytes is 0x24]
    0000: 09 00 00 00 0c 00 00 00 – 24 00 00 00 00 00 00 00 …….. – $…….
    execMtpOp: MTP_OP_GetStorageInfo – Data payload [ID c] (0x0000002c bytes):
    0000: 0c 00 00 00 0c 00 00 00 – 04 00 03 00 00 00 00 00 …….. – ……..
    0010: 70 ba 03 00 00 00 00 00 – 0a b9 03 00 00 00 ff ff p……. – ……..
    0020: ff ff 03 53 00 44 00 00 – 00 00 00 00 …S.D.. – ….
    execMtpOp: MTP_OP_GetStorageInfo – CmdResponse payload (resp=”MTP_RESP_Ok”):
    0000: 07 00 00 00 01 20 0c 00 – 00 00 ….. .. – ..
    MtpStorageInfoTuple(storageType=4, fileSystemType=3, accessCapability=0, maxCapacityBytes=16012804096L, freeSpaceBytes=15989342208L, freeSpaceInImages=4294967295L, storageDescription=3, volumeLabel=u’\u4400′)
    execMtpOp: MTP_OP_GetObjectHandles – CmdReq payload:
    0000: 06 00 00 00 01 00 00 00 – 07 10 0d 00 00 00 01 00 …….. – ……..
    0010: 02 00 00 00 00 00 00 00 – 00 00 …….. – ..
    execMtpOp: MTP_OP_GetObjectHandles – DataStart payload [expected data bytes is 0x20]
    0000: 09 00 00 00 0d 00 00 00 – 20 00 00 00 00 00 00 00 …….. – …….
    execMtpOp: MTP_OP_GetObjectHandles – Data payload [ID c] (0x00000028 bytes):
    0000: 0c 00 00 00 0d 00 00 00 – 07 00 00 00 00 00 00 90 …….. – ……..
    0010: 00 00 90 91 c2 2d 90 91 – d2 2d 90 91 e2 2d 90 91 …..-.. – .-…-..
    0020: f2 2d 90 91 00 00 08 a0 – .-…… –
    execMtpOp: MTP_OP_GetObjectHandles – CmdResponse payload (resp=”MTP_RESP_Ok”):
    0000: 07 00 00 00 01 20 0d 00 – 00 00 ….. .. – ..
    All MTP object handles (count=7):
    0000: 90000000 91900000 – 91902dc2 91902dd2
    0010: 91902de2 91902df2 – a0080000
    execMtpOp: MTP_OP_GetObjectInfo – CmdReq payload:
    0000: 06 00 00 00 01 00 00 00 – 08 10 0e 00 00 00 00 00 …….. – ……..
    0010: 00 90 ..
    MTP_OP_GetObjectInfo: Socket error, partial data received – 0x0 of 0x0 bytes for specific payload, 0x0 of 0x0 of total data bytes expected. Error: timed out

    openConnection(): Attempting connection to 192.168.1.2:15740

    >> Terminated by user keypress – cleaning up, please wait… <<

Viewing 4 posts - 1 through 4 (of 4 total)